PVC / ABS / Acrylic / Special
Industry News
Current Location: HOME > News > News > Industry News
Why acrylic edge strip will be called 3D edge strip
Release date:2016-06-15 Clicks:1540
More
Furniture is in PVC Printing ink and coating substrate UV Paint curing. The grain edge shows good simulation result is that the quality of ink. Now on the market price in ink Twenty element / Kg. - 160 element / Kg range, excellent quality ink printing edge, then simulation effect of edge banding close to printing plate, rich layering, and three years of indoor fading is not obvious. Printing at present abundant edge is mainly followed by three color printing, two color printing and color printing. test method : The edge using different printing strip on the strong sunlight for a week, and then the sun before the contrast can be seen two kinds of edge fading degree of dissimilarity. Wood edge wear and the degree of transparency and UV The quality of paint is related to qi. UV Paint market price Fifty element / Kg. - 120 element / Kg, if the edge surface easy to scratch, vagueness is due to the use of poor quality UV Paint. Sealing strip and plate bonding degree, edge banding and heat bonding effect depends on the quality of the adhesive. With the edge of the adhesive sheet has certain requirements in temperature. Although the edge hot-melt adhesive barrel temperature in hot sol 200 o C - 180 o C But, hot roll plate and sol edge bonding point 20CM - 30CM The distance. The workshop of low temperature, fast heat dissipation, so the plate edge and the bonding points in temperature 120 o C The following, so the bonding effect is not ideal. At this time if the use of gum is not good is more easy to open ( The current market price of the gum : 18 element / Kg. - 50element / Kg. ) . Resolvent : Because of the material from the region of low temperature to cut because the temperature is too low and the influence of side plate bonding effect, so to maintain the indoor temperature in the workshop 15 o C Above, and in the edge edge plate and a thermostat cover. Look at the edge of the surface and the bottom surface roughness, thickness of Pu is uniform, otherwise it will lead to joint edge and plate, plate and glue line too eye-catching or edge of this gap between too much influence the beauty of the whole. Details determine success or failure, often a little details, may bring the overall poor results of embarrassment.
Tel
Feedback